Qualcast CLMB3634M Instruction Manual Download Page 15 | Manualshive

Page: 15 / 24

Qualcast CLMB3634M Instruction Manual Download Page 15

15

Customer Helpline

08456 400 800

10

Mowing Advice (continued)

iPower Control Panel on Mower Handle

Operating Instructions & Tips

WARNING!

A flashing LED on the cutting mode control panel indicates that the current is too high. A

flashing LED on the battery indicates that the voltage is too low. In either case the motor will be shut
down automatically . Do not continue to activate the On/Off switch if the motor has been shut down
automatically. The battery may be damaged.

WARNING!

Switch the machine off, remove the isolator key and the battery before adjusting or

cleaning or if the cable is cut, damaged or entangled.

Panel rotation

17

:

the control panel on the handle can be rotated for better readability.

Auto mode: automatically varies the amount of power delivered to the motor while you work as grass
conditions vary.

NOTE!

The battery will run for longer on lower power settings than on higher power settings.

Checking the battery charge level:

Press on the battery charge status button

29

to check

theactual. battery charge level. The LEDs

30

will display the battery charge level. (See Battery LED

panel below)

17

30

29

«
...
13
14
15
16
17
...
»

Summary of Contents for CLMB3634M

























Reviews:

No comments