EC Declaration of Conformity
We: Turfmech Machinery Ltd
Of: Hangar 5, New Road, Hixon, Staffordshire, ST18 OPJ, UK
Declare that equipment: Category 32 electric lawn trimmer/mower
conforms to the essential requirements of the following directives and their amendments:
2004/108/EC, 2006/42/EC, 2000/14/EC and ha s been designed and manufactured to the
following standards: BS EN 836, BS EN 60335.
Typically the A-weighted noise level of the product is:
Model number
Sound
pressure
level
Sound power
level
Uncertainty
(K)
Guaranteed sound power
level 2000/14/EC
CEM30
79 dB(A)
90dB(A)
4 dB
94dB(A)
Wear hearing protection!
Vibration emission values (triaxial vector sum) determined according to BS EN 836
Model number
Vibration
Uncertainty (K)
CEM30
2.5 m/s
2
1.5 m/s
2
Notified body: AV Technology Ltd, Avtech House, Arkle Avenue, Stanley Green
Trading Estate, Handforth, Cheshire, SK9 3RW
Technical file at: Turfmech Machinery Ltd, Staffordshire, UK
I hereby declare that the product described under “technical data” has been tested and
found to comply with the relevant sections of the above referenced specifications. The
unit complies with all essential requirements of the directives.
Place: Stafford, July 2011
Signature:
Position: Managing Director
6
Fault Finding
Service
Declaration of Conformity
F016J10011A page 10
Turfmech Machinery Ltd
Hangar 5 - New Road
Hixon - Staffordshire ST18 0PJ England
Helpline:
0906 633 0934
Calls cost £1.53 per network extras.
Bill payers only - 18+. Calls are recorded.
Provider: A2B, 0870 046 0138
Hours of service are
8am-5pm Mon-Fri / 10am-5pm Sat-Sun
Web helpline: www.mowerhelp.com
The following table gives checks and actions that you can perform if your machine does not oper-
ate correctly. If these do not identify/remedy the problem, contact your service agent.
Warning: Switch off and remove plug from mains before investigating fault.
y
d
e
m
e
R
e
s
u
a
C
e
l
b
i
s
s
o
P
m
o
t
p
m
y
S
Machine fails to operate Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Machine functions
intermittently
Extension cable damaged
Machines internal wiring damaged
Inspect cable, replace if damaged
Contact Service Agent
Machine labours or
belt squeals
Height of cut too low
Blades adjusted too tight
Increase height of cut (see “Height
of Cut Adjustment”)
Adjust blades
Machine leaves ragged
finish
Cutting blade blunt
Blades off cut
Contact Service Agent
Adjust blades
Cutting blade not
rotating
Cutting blade obstructed
Blades too tight
Cutting blade damaged
Gears slipping or damaged
Gears have failed to protect blade
from damage
Clear obstruction
Slacken off blade adjuster screws
Contact Service Agent
Contact Service Agent
Excessive vibration/
noise
Cutting blade damaged
Belt slipping
Cutting blades not adjusted evenly
Contact Service Agent
Adjust blades
Poor collection Mowing in wet conditions Allow grass to dry
