Each headset needs to be registered to
the system for the first time before use. The
system has the capacity for 30 headsets.
To register one or more headsets, follow
this procedure:
1
Make sure the new headset has a
charged battery (blue LED flashes every
five seconds).
2
Make sure all the headsets in use with the
system are in range of the Base. If a
headset isn’t in range of the Base during the
registration process it will be deleted from the system.
3
Put the Base in ‘registration mode’ by pressing the Registration Button
on the Base, or by pressing the wall-mounted Registration Button, for
five seconds. On the Base both LEDs should be flashing green.
4
Place the new headset to your ear, press the large silver button and
volume toggle down for three seconds. Wait for the bleeps to change
their frequency and tone to one bleep every second.
5
A three second long bleep signifies successful registration. You may
also hear a double bleep tone that will indicate it is ready to use.
6
As soon as a headset is registered, it is ready to use. Press the
Registration Button again to exit the registration process or leave it to
time-out after 10 minutes.
Registering and using headsets
PRO
7
HEADSET SYSTEM
