Quail Digital Q-HCBS, User Manual

Page: 7 / 16

7
Registering and using headsets
Each headset needs to be registered to the system for the first time before
use. The system has the capacity for 30 headsets at any one time. New
or additional headsets can be added at any time by following the
registration process. To register one or more
headsets, follow this procedure:
1
Make sure the new headset has a charged
battery (blue LED flashes every 5 seconds).
2
Make sure all the headsets in use with the system are in range of the
Base. If a headset isn’t in range of the Base during the registration
process it will be deleted from the system.
3
Put the Base in ‘registration mode’ by pressing the Registration Button
on the Base for 5 seconds. On the Base both LEDs will flash green.
4
Place the new headset to your right ear, press the large silver button
and volume toggle down for 3 seconds. Wait for the bleeps to
change their frequency and tone to 1 bleep every second.
5
A 3 second long bleep signifies successful registration. You may also
hear a double bleep tone that will indicate it is ready to use.
6
Once headsets have successfully registered to the Base, place them
back in the charger. The system as a whole goes through an internal
process of alignment with all the headsets and Base(s). This process can
take up to 10 minutes. After 10 minutes the headsets will be fully
operational with the Base(s).
7
The registration process will time-out after 10 minutes, no further action
required.
8
The system is now ready to use.