15. Th
e system can’t
resume
operation
Solution:
◊ Malfunction of external memory or internal memory – an error will occur during saving into the
system memory, it will not execute normal operation
◊ External peripheral connected to the system not compatible – such as external USB devices,
compact flash, MMC, Smart Media are complicated devices will easily cause the computer to
enter standby mode thus unable to resume operation
◊ Un-suitable program or driver – any un-suitable driver could cause any extension file like .dll, .sys
and .exe would not allow the system to enter standby or hibernate mode
◊ Operating System loses effect – the power saving mode of Microsoft operating system adopt
ACPI mode (advanced Configuration and Power Interface), the power scheme will be handle by
the OS thus affecting the power saving mode of the system
16. D
ispl
a
y p r obl
e
m
Problem:
Display LED too bright or too dark
Solution:
Adjust the LED brightness; press the hotkey combination by brightness up or brightness
down
Problem:
The whole image does not display on the screen
Solution:
This symptom will occur if you are executing any program or playing games design to run only
on 800x600 resolution. Adjust the display to a higher resolution.
Problem:
Cannot execute any function
Solution:
This only happens when the system is in hold status. Slide the power/hold switch to power on,
this time the charge LED indicator will lit thus allowing you to restart your computer. If you are operating
the computer using the battery, examine the battery charge status
Problem:
The power switch is not operating
Solution:
This only happens when the system is in hold status. Slide the power/hold switch to power
on, this time the charge LED indicator will lit thus allowing you to restart your computer