QuadTech, Inc. 1880-00, Instruction Manual

Page: 24 / 28

Page 24 of 28 Operation
2.11.5 Output Data Format
Output data is in floating point format as illustrated in Table 2-4 below. A data string is
preceded by R if display is resistance value and P if display is % deviation.
NOTE
A negative value is possible on the lowest range or ranges when test lead zeroing is
enabled.
Table 2-4: Output Data Format
Range Measurement Results
(Resistance) R Value (Resistance)
Over Indication
R1
R = - - . - - - m R = 999999 m
R2
R = - - - . - - m R = 999999 m
R3
R = - . - - - - R = 999999
R4
R = - - . - - - R = 999999
R5
R = - - - . - - R = 999999
R6
R = - . - - - - k R = 999999 k
R7
R = - - . - - - k R = 999999 k
R8
R = - - - . - - k R = 999999 k
R9
R = - . - - - - M R = 999999 M
Range
Measurement Results
(%) % Deviation
Over Indication
R1 P = - - - . - - % P = 999999 %
R2 P = - - - . - - % P = 999999 %
R3 P = - - - . - - % P = 999999 %
R4 P = - - - . - - % P = 999999 %
R5 P = - - - . - - % P = 999999 %
R6 P = - - - . - - % P = 999999 %
R7 P = - - - . - - % P = 999999 %
R8 P = - - - . - - % P = 999999 %
R9 P = - - - . - - % P = 999999 %