Battery and Charger Specifications
Charging Your Drone
Syncing the Quad and Remote
1. Use the included screw driver to open the battery cover. Rotate counter
clockwise to loosen screw.
2. Insert 4 AA batteries into the remote. Make sure the batteries are
installed in the correct polarity as indicated in the controller. Do not mix
old and new batteries or batteries with different chemistries.
3. Reattach battery cover.
1. Turn on your Quadrone by plugging the battery into the drone. Place it
on a flat surface. The red lights on the Quadrone will begin to flash. Do
not move the Quadrone during the syncing process to ensure the
gyroscope stays balanced.
2. Lower the Throttle joystick of the remote to its lowest position. Press the
power button on the remote to turn it on. The remote will beep and
Quadrone’s lights will continue flashing.
3. Push the Throttle joystick to its highest position and the remote will
beep again. The lights on the quad will now flash at a slower rate. Move
the joystick to its lowest position one more time and the remote will beep
a third time. The lights on the quad will stop flashing and remain on. The
Quadrone and remote controller have been synced together. You are now
ready to fly.
Battery Type
Li-Po Battery
3.7V 250 mAh
1.5V
(GP 15G R4P)
Quadrone
Flight Time:
Approx. 10 Minutes
Approx. 30 Minutes
(Charging current approx. 0.35A)
Non-Rechargeable
Remote
Operation Time:
18 Hours
Carbon-Zinc
Battery
(Non-Rechargeable)
Battery
Specification
Usage Duration
Charge Time
5
• To charge your Quadrone, first disconnect
the battery from the drone and slide it out
of its holder. Plug the provided USB
charger into a USB port. Now connect the
USB charger to the battery. A red light on
the charger will turn on, indicating the
battery is now charging. The red light will
turn off again once the charging process
has completed. Always charge your
Quadrone under adult supervision and
out of the reach of children. Charging
time is approximately 30 minutes. When
you are ready to fly your Quadrone again,
reinsert the battery into its slot on the
bottom of the drone.