1. Sideways fine-tuning (Turn left/right fine-tuning in Mode 2)
2. Forward/backward fine-tuning
3. Turn left/right fine-tuning (Sideways fine-tuning in Mode 2)
4. Throttle power
5. Forward speed
6. Backwards speed
7. Right sideways speed
8. Left sideways speed
9. Left turning speed (The higher the level, the faster it will turn)
10. Right turning speed (The higher the level, the faster it will turn)
11. High/Low speed: Hold the “A” button to switch between high speed mode and low speed mode. “H” means high
speed and “L” means low speed.
12. Power indicator: Shows the remotes battery life
13. Mode indicator: Mode 1 is the default mode when powered on. To change to Mode 2, hold the “B” button, then
re-turn on the remote. The Mode on the LCD display will now be changed.
14. Signal power
Step 1: Switch the On/Off switch to ON.
Step 2: Open the battery cover and insert
the battery into the power port.
Step 4: Push the throttle lever to the
highest position, then push it to its lowest.
There will be a beep from the remote,
indicating the quadcopter is in pre-flight
mode.
Step 3: Close the battery cover and turn on
the quadcopter.
Step 1: Push the On/Off switch of the
quadcopter to the OFF position and then
open the battery cover.
Step 2: Pull the battery wire out of the
power port.
Step 3: Insert the battery power port to the USB
charging cable. A light will turn on to indicate it
is charging.
GETTING READY TO FLY
CHARGING YOUR BATTERY
REMOTE CONTROL KEYPAD AND LCD SCREEN
