Quadro4Li Manual II: Administrator's Guide
Administrator’s Menus
Quadro4Li; (SW Version 5.2.x)
104
To Add a new Group with Members
1.
Select
the
Manage IP Pool Groups
link on the
Filtering Rules
page.
2.
Click on the
Add
button on the
IP Pool Configuration
page. A page where a new group may be added will appear in the browser window.
3.
Define a group name in the
Group Name
text field and fill in the
Group Description
, if needed.
4.
To add a group with the given parameters, press
Save
.
5.
Open
the
IP Pool Group Configuration
page by clicking on the group name.
6.
Select
the
Add
button on the
IP Pool Group Configuration
page. A page opens where new members may be added to the group.
7.
Enter an IP address for the member in the
IP Address
text fields, select a IP subnet or IP group from the
User defined Group
drop down list to
assign it to the currently selected group.
8.
Enter
a
Member Description
in the corresponding text field, if needed.
9.
To add a member with these parameters to the selected group press
Save
.
To Delete a Member
1.
Select
the
Manage IP Pool Groups
link. The
IP Pool Configuration
page appears with the table of groups (if any).
2.
Click on the desired members that should be deleted. The
IP Pool Group Configuration
list will appear.
3.
Check one or more checkboxes of the corresponding members that should be deleted from the
Members
table. Press
Select all
if all members
should be deleted.
4.
Press
the
Delete
button on the
IP Pool Group Configuration
page.
5.
Confirm the deletion by pressing on
Yes
or cancel the deletion by pressing on
No
.
To Delete a Group
1.
Select
the
Manage IP Pool Groups
link. The
IP Pool Configuration
page appears with the table of groups (if any).
2.
Check the one or more checkboxes of the corresponding groups that should be deleted from the groups table. Press
Select all
if all groups
should be deleted.
3.
Press
the
Delete
button on the
IP Pool Configuration
page.
4.
Confirm the deletion by pressing on
Yes
or cancel the deletion by pressing on
No
.
IDS Log
The
IDS logging
page contains information about dropped packets
and the senders responsible for those packets. IDS discards
dangerous packets or packets including intrusion attacks. It
generates a table with the IDS log report. The administrator can be
notified about newly logged entries in various ways (mail, display
notification and Flashing LEDs) depending on the settings in the
Event Settings
page. To make an IDS log reporting table, IDS
needs to be enabled on the
page.
The
IDS Logs
table is a list of new or read IDS entries and
descriptions referring to them. The table provides a status row that
has the value
New
if the entry is still unread or it is empty if the
entry has already been read.
Mark All as Read
marks all IDS logged entries as read and
removes the
New
status from the
Status
row of the IDS entries
table.
Delete Log
is used to delete all entries from the IDS table.
A detailed log of the selected entry can be seen by clicking on the
Description
link of the corresponding entry in the
IDS Entries
table.
Fig. II-184: IDS Log page
The IDS Logs detailed page has a following preview:
The
Issue Detailed Log
table is a detailed list of new and read IDS
entries. The table contains a
Status
row that has the value
New
if
the entry is still unread or that is empty if the entry has already been
read.
Fig. II-185: IDS issue detailed preview
