Quadro Quadro4 2017, User Manual

Page: 16 / 60

14
GETTING TO KNOW YOUR SCOOTER
Do not drive with the tilting
locking engaged.
TEMPORARILY STOPPING THE
SCOOTER (WITH DRIVER ON
BOARD)
If you simply bring the scooter to a halt,
remaining seated on and therefore in
control of the vehicle, it is not neces-
sary to insert either the tilting lock or the
parking brake.
These systems may nevertheless be
required depending on the road condi-
tions (e.g. pulling over on slopes etc.).
STOPPING THE SCOOTER
If the scooter is stopped and left by the
driver, they must:
•
Engage the tilting lock
•
Engage the parking brake
•
Engage the steering lock
You must always follow the
highway code of the country in
which you are driving when park-
ing the scooter.
If you must drive with the
tilting lock engaged, it is obligato-
ry to place one or both feet on the
ground and keep one of the brake
commands pressed (integrated
brake pedal or lever).
Remember that engaging
the parking brake lever requires
the scooter to be turned off.
For further information, read the
“Parking brake lever” section in
this chapter.
Tilting lock
Placing lever A fi g. 10 in the 0 position
engages the tilting lock, preventing the
scooter from tilting.
Releasing the Tilting Lock
Placing lever A fi g. 10 in the 1 position
releases the tilting lock, allowing the
scooter to tilt.
Engage the tilting lock only
when the vehicle is in a vertical
position.
fi g. 10
A safety device limits the en-
gine speed when the tilting lock is
engaged.