7
FUNCTION INTRODUCTION
1. Setting of wind direction
The angle of the fan head is adjustable, it can be facing upwards
and downwards by slightly lift or press the cover.
2. Setting of shaking
Pressing the turning button and the head starts to rotate, then pull it
out and fan will stop rotating.
3. Setting of wind speed
Pressing button of wind speed can adjust the speed of wind.
SOLUTION TO SIMPLE FAILURE
When starting the fan, the fan blade doesn’t work
:
Please check whether the power plug has really inserted into the
socket or the cover has distorted, which has touched the fan blade.
When starting the fan, loud noise appears:
Please check the unit as following:
1. Fan blade has been tight installed into the output shaft of motor.
2. Groove on back of cover has matched the inserting groove on
the output shaft.
3. There are tiny defective edge ring existing around the fan blade.
4. The cover has distorted, which has touched the fan blade.
INSTRUCTIONS FOR CLEANING
Should you need to clean the fan:
Unplug the fan from the power outlet.
Wipe it down with a damp cloth and a small amount of
non-abrasive cleaning agent.
Never get the fan wet.
Do not use the appliance it if it is wet.
Clean the air inlet and outlet regularly. You may use a vacuum
cleaner for this.
STORAGE INSTRUCTIONS
Summary of Contents for FN-4016
Page 1: ...FN 4016 FN 4516RC...
Page 19: ...WWW INEM HR...
