Quadro CTV-37D10 TXT, Service Manual

Page: 21 / 35

Service Adjustments
-20-
. Item Storage
address
Display
string
Range (Index | value) Default
value
Teletext Vertical position 50Hz 6F 5TYM 0-63 38
Teletext Vertical position 60Hz 70 6TYM 0-63 38
Instruction
Direct Key “5”
NVM option 1 71 OP1 0 1 18
VG2 Alignment mode Bit 0 AVG VSD 0
Instruction
VG2 is usually set to 0.Receive 49.75MHZ PHILIPS signal.
press key "PM" to set picture to standard mode, adjust FBT's
SCREEN VOLTAGE knob, if the screen voltage is too high, the
OSD "high" appears, oppositely, OSD "low" appears, when you
see the characters "HIGH" and "LOW" display by turns, it means
VG2 is well set.
YUV or Yprpb Bit 1 YUV Yprpb 1
WIDE BAND SOUND PLL Bit 2 off on 0
BLACK STRETCH AMOUNT Bit 3 10% 20% 0
AV2 Bit 4 off on 1
SVHS Bit 5 off on 0
BLACK STRETCH DEPTH Bit 6 20IRE 30IRE 0
XX Bit 7 off on 0
NVM option 2 72 OP2 0 1 11
AVL Bit 0 off On 1
Auto sound in autosearch mode Bit 1 off On 1
Pan Europe Teletext set Bit 2 Off On 0
Cyrillic Teletext set Bit 3 Off On 1
Farsi Teletext set Bit 4 Off On 0
Arabic Teletext set Bit 5 Off On 0
Sync On Y (YUV/Yprpb mode) Bit 6 off on 0
Slicing lever Bit 7
dependent on
noise
Fixed 0
NVM option 3 73 OP3 0 1 255
SW1 SW2
English Menu English Menu
Bit 0 Off On 1
Farsi Menu Farsi Menu Bit 1 Off On 1
Arabic Menu Arabic Menu Bit 2 Off On 1
Turkey menu Serbian Menu Bit 3 Off On 1
France Menu Bulgaria Menu Bit 4 Off On 1
German menu German menu Bit 5 Off On 1
Itality Menu Itality Menu Bit 6 Off On 1
Russia Menu Russia Menu Bit 7 off on 1
NVM option 4 74 OP4 0 1 114
Narrow-band sound PLL window Bit 0 small large 0
Power mode Bit 1 standby Last Memory 1