© Quadro Concepts International 2021
QAP 2400 | Assembly Instructions September 2021
IMPORTANT INFORMATION
WARNINGS
1. Estimated installation time is between 45 and 90 minutes, depending on the model and
experience.
2. Handle porcelain stone with extreme care. Do not drop sharp or heavy objects onto the
surface and use caution when installing the BBQ.
3. Do not stand the benchtop or legs (Ascale model) on the porcelain stone edge.
4. Handle steel elements with care to avoid scratching and denting.
5. A minimum of 2 adults required for assembly of the product.
6. Follow instructions for correct assembly. Printed or video assembly instructions available
through the website. Please contact Quadro Concepts International through the website for
support.
7. Ensure that all parts are included before starting to assemble. Please contact Quadro
Concepts International through the website with any issues or enquiries.
8. Assembly on flat, level surface using a soft underlay to avoid damage.
9. Do not use product until all parts are installed correctly
10. Do not use any other tools than the ones provided or recommended in the assembly
instructions. Incorrect assembly will lead to product damage and is not covered under the
limited warranty.
11. Do not use power tools for assembly. Risk of damage to product.
12. During assembly, hand tighten all bolts first, then adjust and align parts that are being
assembled, then tighten bolts with hand tools only (allen key).
13. Make sure all bolts are tightened before installing appliances and using the product. Check
and retighten bolts as required.
14. Once the bench is assembled, move into place and adjust feet to ensure the unit is level
and secure.
15. Please read the instruction manual provided with the appliances carefully before installing
and operating these. If you have questions, please contact the representative for the Artusi
brand.
NOTE: Quadro International P/L will not be held responsible for any defects, installation,
loss or damages in connection with the appliances.
16. Quadro Aperto products are designed for use with recommended Artusi Appliances only. The
use of other appliances will void the warranty.
17. Maximum weight capacity: 50kg across benchtop. Avoid sharp or pointed edges or heavy
objects being dropped onto any of the porcelain stone surface
18. A spare parts oder form is available online.
19. All documents, information and products produced and provided by Quadro Concepts
International Pty Ltd are subject to copyright and may be subject to change without notice.
CARE
21. Only use warm, soapy water with a soft cloth for cleaning of steel components. Harsh
cleaners and abrasive materials may damage the powder coated surface.
22. Use natural or alkaline detergents to maintain the porcelain stone surfaces. Make sure you
rinse the surface thoroughly after cleaning. The surface is sealed and requires no additional
maintenance.
23. Avoid cleaners with wax, sealing or polishing additives.
24. Ascale porcelain stone is highly scratch resistant. Brushes and pads can be used for
cleaning. Do not use ceramic or steel based tools to remove dirt build-up as this could
damage the surface of the porcelain stone.
25. Please recycle all packaging materials appropriately.
LIMITED WARRANTY
1. Warranty Period: All Quadro products hold a general 12 month limited warranty against
material or functional defects.
2. In addition, the Ascale porcelain stone holds a 25 year factory warranty backed by Tau,
Spain.
3. The limited warranty on the Tau Ascale porcelain stone is a factory warranty and only
applies to discolouring and damage to the surface during intended use. Damages due to
incorrect handling are not covered under this warranty.
4. Installation and handling damage is not covered under this warranty.
5. The product warranty is valid for Australian customers only, and applies only to the
original customer.
6. If the product has any defects or does not work as intended during the Warranty Period,
Quadro Concepts International Pty Ltd will at its election and at its expense repair or
replace the product.
7. The Warranty does not apply:
- to cosmetic damage sustained during or after initial assembly;
- to damage caused by consumables used in connection with the product (such as
cleaning products);
- where the product has not been used in accordance with all provided instructions;
- where the Warnings in this document have not been adhered to;
- to damage arising from fair wear and tear;
- where the product has not been subject to reasonable use;
- where the product has been intentionally or negligently damaged; and /or
- if the customer has attempted to repair the product.
8. This warranty is provided in addition to any rights you may be entitled to under the
Competitions & Consumer Act 2010.
9. Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
10. To make a warranty claim, please use the form on the website at www.quadroconcepts.com
