3
Press the
“
+
”
or
“
-
”
button,you can set the temperature
range from
℃
℃
16
to 32
,Display will change when you touch
the button.
8.
“
”
or
“
”
button
△
△
9.
“
CLEAN
”
button
a. When remote controller is at the off state, press
clean
“
”
button, the wind guiding bars turn to initial postions for
cooling, the A/C runs
clean
function with max duration
“
”
35mins.The purpose of this function is to clean dust on
evaporator and dry the inside water of evaporator and
to prevent the evaporator going moldy due to water
deposition and boasting strange smell.
b. After setting
clean
function, press
clean
button
“
”
“
”
again to cancel
clean
function or press
ON/OFF
“
”
“
”
button to cancel
clean
function and start A/C.
“
”
c. The clean function will be stop working after 35 minutes
running working without any operation.
Note:
clean
function can be set in parallel with
“
”
time start
function; in this case ,
time start
“
”
“
”
function will be executed after
clean
function.
“
”
10.
“
MODE
”
button
AUTO
→
COOL
→
DRY
→
HEAT
→
FAN
→
AUTO
Remark: cold wind type has no heating function.
Which enables you to select different operation mode,
after each pressing, the operation mode will be changed. It
shows in the following display.
11.
“
SLEEP
”
button
1.Press the SLEEP button, the sleeping indicator light of
indoor unit flashes on.
2.After the setting of sleeping mode, the cooling operation
enables the set temperature to increase 1
℃
after 1hour
and another 1
℃
automatically after 1 hour.
3.After the setting of sleeping mode, the heating operation
enables the set temperature to drop 2
℃
after 1hour and
another 2
℃
automatically after 1 hour.
4.The air-conditioner runs in sleeping mode for 7 hours and
stops automatically.
Remark: press the MODE or ON/OFF button, the remote
controller clears sleeping mode away.
