The Trusted Source
®
4
Rack Assembly:
Put on Safety Glasses. Position the
padded U bracket to the bottom of the
main rack assembly so that the lower pad
tilted out at the base of the rack.
Secure the U bracket to the main rack
with M6 x 60 cap screws (2), washers (4),
and Nylock nuts (2). Tighten the bolts
and nuts with the included M5 hex
wrench and 10mm combination wrench.
Repeat on opposite side.
Position the hinged clamp over the upper
holes in the main frame. Ensure the lock-
ing end of the clamp is facing the same di-
rection as the open end of the u bracket.
Attach the hinged clamp with (2) M6x65
cap screws, (4) washers, (2) plastic spac-
ers, (2) nylocks. Place the plastic spacer
between the outside of main frame and
the hinged clamp. Tighten with the
provided M5 hex and 10mm wrench.
Repeat on opposite side.
FIG1
FIG2
FIG3
FIG4
Q_SKI_RACK_92034_1030_INST_A4.qxp_A4 8/30/19 3:33 PM Page 4
