background image

Please note, easy removal of 3 windows
to create the ultimate “Bimini” Plus 

Top, which easily converts back to a
weather proof complete soft top.

The Trusted Source

®

18

With your vehicle completely stopped,
in park, unlatch the two front section
latches. Reach up through your drivers
and passenger windows and undo the
hook & loop side strips attached to the

upper door surrounds. Grab the Flip Top
Center Grab Handle and gently fold
back the top structure towards the back
of the vehicle.

While open, the sunroof fabric will rest
on the top deck, allowing you to enjoy
the open top experience! To close the
sun roof, stop the vehicle, pull off the
road and put the vehicle in park.

Simply grab the center hold bar and fold
the top forward. Latch both windshield
latches and reattach the hook & loop
fasteners on the door surrounds.

Adventure Top Fold Back Operation Steps:

NEVER OPEN UP OR CLOSE YOUR ADVENTURE TOP S SUN ROOF WHILE
DRIVING OR WHILE THE VEHICLE IS MOVING. SERIOUS DAMAGE TO YOUR
VEHICLE AND SOFT TOP CAN OCCUR! ALWAYS PULL OFF THE ROAD IN A
SAFE SPOT, COME TO A COMPLETE STOP AND PUT THE VEHICLE IN PARK
BEFORE ATTEMPTING TO FOLD BACK OR RE-SECURE YOUR SUNROOF. 

ADV_2DR_S_UPDATED.qxp_QTOP  5/23/17  11:45 AM  Page 18

05232017114901

Summary of Contents for QuadraTop Adventure Top S





















Reviews: