Put on Safety Glasses. Loosen the but-
ton head hex screws (4) on the top and
bottom on each end of the light bar
brackets with a 4mm hex key. This will
allow the brackets to slide in and out in
order to fit multiple width light bar
mounts.
Position the light bar on your mounting
brackets and center it left to right on
your the vehicle.
Attach the light bar to your brackets
with the provided bolt, nylock and
washer. Tighten the nut and bolt with
two 13mm wrenches or a wrench and
a 13mm socket.
Snug the button headed screws on the
top and bottom of both ends of the
lightbar with a 4mm hex wrench.
LED Lightbar Installation:
3
The Trusted Source
®
J5_BAR_INST.qxp_Layout 1 10/12/16 2:37 PM Page 3
10122016143919