4
The Trusted Source
®
Installation Instructions:
Tighten in the desired position with (2)
10mm wrenches. (FIG7)
Place the rack on top of the vehicle and
position the uprights into the drip rail
on either side of the vehicle.
Take care to place them in the same
position on both sides. Snug the clamp
against the outside of the drip rail with
the hand knob. Position second rack
and repeat installation. At this point
even the spacing of the crossbar in the
uprights and fully tighten the retaining
strap bolts with a 4mm hex key and
10mm wrench.
Slide the cross bar through the upright
and retaining strap. Repeat on opposite
end. (FIG5)
Attach the optional tie down loop to the
crossbar with a hex bolt and nylock nut.
(FIG6)
FIG 5
FIG 6
FIG 7
FIG 8
DRIP_RAIL_92034_1020_6PG_A4.indd 4
4/3/19 4:46 PM