Relocation Bracket Installation:
FIG 1
Put on safety glasses. Start by removing
the rear camera cover using a t30 torx
bit, and remove the spare tire using a
21mm socket.
Using a 13mm socket, remove the (8)
13mm M8 bolts holding the tire carrier
on. [FIG 2]
To help hold the spare tire carrier, you
can use cable ties to hold it to the door
handle. [FIG 3]
FIG 2
FIG 3
FIG 4a
4
Using the Side Cutting/Diagonal Pliers,
trim the rear vents to have clearance for
the relocation brackets to fit.
[FIGs 4a & 4b]
FIG 4b
BEFORE BEGINNING
INSTALLATION, THE
VEHICLE MUST BE PARKED ON A HARD AND
LEVEL SURFACE, WITH THE TRANSMISSION
IN PARK (6TH GEAR FOR A MANUAL
TRANSMISSION), THE PARKING/EMERGENCY
BRAKE ON AND THE EINGINE OFF.
