The Trusted Source
®
3
Install a reinforcing plate and nylock on
the inside of the cargo basket as shown.
Repeat on the remaining 3 holes and
then tighten with a 17mm wrench.
Install the assembled rack into the
2” receiver hitch on your vehicle and
secure it with the supplied 5/8”
hitch pin and cotter pin.
Cargo Rack Installation:
Place the Cargo basket onto the receiver
tube assembly as shown with the reflec-
tors facing the rear. Align the square
holes in the reliever tube with the
square holes in the cargo basket.
Then, insert a carriage bolt through
the receiver tube and cargo basket.
Q_ALUM_RACK_12033_1003_4PG.qxp_Layout 1 10/17/19 11:05 AM Page 3
