The Trusted Source
®
2
Figure 1
Figure 2
THIS IS DESIGNED FOR A CLASS II RECEIVER
THE RACK IS RATED FOR A MAXIMUM OF 300 LBS
CONSULT & NEVER EXCEED LESSER OF VEHICLE, RECEIVER
OR TRAILER MAXIMUM TOW OR WEIGHT RATINGS.
DO NOT BLOCK TAILLIGHTS OR LICENSE PLATE WITH CARGO LOAD.
CONSULT AND FOLLOW ALL LIMITATIONS & WARNINGS IN YOUR
VEHICLE OWNERS MANUAL AND SAFE TOWING SUPPLEMENT.
SECURELY FASTEN LOAD TO CARGO CARRIER. ATTACH STRAPS
AND/OR TIE DOWN HOOKS TO THE TUBULAR FRAME OF CARGO RACK.
DO NOT CARRY ANY LOADS WIDER THAN YOUR VEHICLE.
TO REDUCE RISK OF SERIOUS INJURY OR PROPERTY DAMAGE:
INSTALL ACCORDING TO INSTRUCTIONS. TORQUE AND RECHECK
FASTENERS AFTER 250 MILES AND FREQUENTLY THEREAFTER.
INSPECT AND DO NOT USE RECEIVER/BUMPER IF DAMAGED.
Before You Begin Installation:
Congratulations on your purchase of a
Quadratec Cargo Receiver Rack. This
version is specifically designed for use
with a 2” receiver style hitch.
When unpacking, check to make sure all
parts are included and not damaged due
to shipping. If any part is missing or
broken, please call Customer Service at
800-745-6037 as soon as possible.
As cargo racks tend to be bulky, we
suggest you get help for steps involving
lifting, locating or holding the rack as-
sembly during installation.
Thank you again for your purchase
and let’s start the installation process.
a hazardous situation which, if not avoided, could result in death or
serious injury. You CAN be KILLED or SERIOUSLY HURT if you don’t
follow instructions.
a hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don’t follow instructions.
Careful attention is required to this instruction or operation but does
generally not relate to personal injury. Damage to your Quadratec
®
product or other property may result if you don’t follow instructions.
A Few Words About Product Safety:
Your Receiver Mounted Cargo Rack is
intended to enhance the utility and en-
joyment of your off road capable vehicle.
Before installation, please take a mo-
ment to review the following safety in-
formation, assembly and installation
instructions. Important safety
information is generally preceded by
one of three signal words indicating the
relative risk of injury.
The signal words mean:
Q_RACK_COMPACT_12033_1000_Layout 1 10/31/14 11:33 AM Page 2
10312014113410
