Hearth & Home Technologies - Colville
1445 North Highway, Colville, WA 99114-2124
VILLAGE COLLECTION ELECTRIC FIREPLACE
09/03
12
4030-240 Rev F
Note:
When placing the white rock and lava rock, you
may want to periodically turn on the appliance to check
the appearance and customize to the desired effect.
7. Place the White Rock
Open the bag of white rock and spread it over the ember bed glass
and hearth refractory (if desired). This will create the effect of burning
embers. Not all of the white rock needs to be used. See Figure 15.
8. Place the Lava Rock
Open the bag of lava rock (black) and spread it sparingly on top of
the white rock and hearth refractory. This will create the effect of an
ash bed. Not all of the lava rock needs to be used. See Figure 16.
9. Replace the Log Assembly
Set the logs back onto the grate assembly. Some of the rock may
have to be rearranged. This will allow the logs to set correctly on
the grate. See Figure 17.
10. Install the Door Front
a.
Remove the door front and hood from the packaging. Using
pliers (or your hands), bend out the tabs on the columns to
attach the front to the appliance. See Figure 18.
b.
Follow the installation instructions included in the door front kit.
The appliance is now ready to operate. See section I. Operating
Instructions.
Figure 16 - Placing Lava Rock
Figure 15 - Placing White Rock
Figure 17 - Replace Log Assembly
Figure 18 - Bending Out Tabs
All manuals and user guides at all-guides.com
