background image

8

04/21

7058-805F

D. Glass Specifications

This appliance is equipped with 5mm ceramic glass. 

Replace glass only with 5mm ceramic glass. Please 

contact your dealer for replacement glass.

H. California - Prop65

Hearth & Home Technologies WILL NOT warranty 

appliances that exhibit evidence of over-firing. Evidence 

of over-firing includes, but is not limited to:

• 

Warped air tube

• 

Deteriorated refractory brick retainers

• 

Deteriorated baffle and other interior components

NOTE:

 

Hearth & Home Technologies, manufacturer 

of this appliance, reserves the right to alter 

its products, their specifications and/or price 

without notice.

Improper installation, adjustment, alteration, service or 

maintenance can cause injury or property damage.

For assistance or additional information, consult a qualified 

installer, service agency or your dealer.

• 

Installation and use of any damaged appliance. 

• 

Modification of the appliance.

• 

Installation other than as instructed by Hearth & 

Home Technologies.

• 

Installation and/or use of any component part not 

approved by Hearth & Home Technologies.

• 

Operating appliance without fully assembling 

all components.

• 

Operating appliance without legs attached (if 

supplied with appliance).

• 

Do NOT Over fire - If appliance or chimney connector 

glows, you are over firing.

Any such action that may cause a fire hazard.

WARNING

Fire Risk

Hearth & Home Technologies disclaims any 

responsibility for, and the warranty will be 

voided by, the following actions: 

WARNING

This product and the fuels used to operate this product (wood), and 

the products of combustion of such fuels, can expose you to 

chemicals including carbon black, which is known to the State of 

California to cause cancer, and carbon monoxide, which is known to 

the State of California to cause birth defects or other reproductive 

harm. For more information go to: WWW.P65Warnings.ca.gov

G. Sleeping Room

When installed in a sleeping room it is recommended that 

3ft of vertical be installed prior to horizontally exiting the 

room and a smoke/CO alarm be installed in the bedroom; 

The size of the room must be at least 50ft³ per 1,000 Btu/hr 

stove input, if the stove exceeds the room size, outside air 

must be installed.

E. Electrical Rating (on high)

F. Mobile Home Approved

• 

This appliance is approved for mobile home 

installations when not installed in a sleeping room and 

when an outside combustion air inlet is provided.

• 

The structural integrity of the mobile home floor, ceiling, 

and walls must be maintained. 

• 

The appliance must be properly grounded to the frame 

of the mobile home with #8 copper ground wire, and 

use only listed double-wall connector pipe.

• 

Outside Air Kit, part 811-0872 or OAK-3 must be 

installed in a mobile home installation.

•  Appliance must be secured to mobile home structure.

115 VAC, 60 Hz, Start 3.8 Amps, Run 1.3 Amp

Summary of Contents for PS35-C









































Reviews: