background image

 10 

 

 

 

 

                     7036-187C  

 

 

 

                June 18, 2014

MT. VERNON AE INSERT

J.  Battery Back-up System (Optional)

CAUTION! 

•  Hook up to battery terminals BEFORE you plug battery 

into appliance.

•  Damage to internal electronic components may occur.

The appliance has been designed to operate on an optional 
battery back-up system.  

If you have frequent power outages in your region, hook 
the appliance up to a 12 volt battery and it will automatically 
switch to battery power in the event of a power failure.  The 
12 volt power cord, sold as a separate accessory, does not 
charge the battery.

WARNING! Risk of Injury!

•  Blowers may continue to run and would be exposed to 

human contact.

Operating on Battery Back-Up

• 

A battery icon appears on your wall control to let you know 

you are now operating on battery power.  

Figure 10.2.

• The 

fi re must be manually lit as the appliance will no lon-

ger automatically light.  Follow the instructions in the Wall 
Control Manual.

• 

Use only approved fi re starting gel to start the fi re. 

•  The high burn rate is no longer available on battery back-

up.

• E

ach level drops down one level, i.e

 the high burn be-

comes medium-high burn and so on.

•  If the battery charge falls below 10 volt it can no longer 

sustain the appliance operation and the appliance will 
shut down.  

Figure 10.1.

  You must disconnect and re-

connect the battery to start it up again.

Recommended Battery

•  12 volt deep cycle battery, (i.e., marine or RV type).  

• 

A 12 volt battery cable is available through your local 

dealer.

13 Volts 

12 Volts

11 Volts

Battery 

Below 

10 Volts

Figure 10.1

K.  Clear Space

Mantel:

  Avoid placing candles and other heat-sensitive 

objects on mantel or hearth.  Heat may damage these objects.

NOTICE: 

 Clearances may only be reduced by means ap-

proved by the regulatory authority having jurisdiction.

MAINT BURN

73

Set at:  73

12:30 PM

HEAT OUTPUT

MENU

“Maint Burn” will display when 
the thermostat has reached the 
set room temperature and will 
run on low until it reaches its 
auto-clean cycle time.

Battery icon.

Figure 10.2

Wall Control Display

The wall control will display the battery icon when operating 
in the battery back-up mode.  

Figure 10.2

Fire Risk.

Keep combustible materials, gasoline and other 
fl ammable vapors and liquids clear of appliance.

•  Do NOT store fl ammable materials in the 
appliance’s vicinity.

• 

DO NOT USE GASOLINE, LANTERN FUEL, KEROSENE, 
CHARCOAL LIGHTER FLUID OR SIMILAR LIQUIDS TO 
START OR “FRESHEN UP” A FIRE IN THIS HEATER. 

   DO NOT BURN GARBAGE OR FLAMMABLE FLUIDS 

SUCH AS GASOLINE, NAPHTHA OR ENGINE OIL.

   DO NOT USE CHEMICALS OR FLUIDS TO START THE 

FIRE. 

•  Keep all such liquids well away from the heater while it is in 

use.

•  Combustible materials may ignite.

WARNING

Fire Risk.

Do NOT place combustible objects in front of the 
appliance. High temperatures may ignite clothing, 
furniture or draperies.  Maintain a minimum clear-

ance of 3 feet (914mm) in front of appliance.

WARNING

Summary of Contents for MTVERNINSAE-MBK













































Reviews: