21
July 30, 2019
7095-802B
EXPEDITION II INSERT
Trim Kit
Option
Flat
Surround
Corner Brackets
Figure 21.1
Figure 21.2
Figure 21.3
Figure 21.4
G. Flat Surround with Trim Kit
1.
Follow steps one through three of Section E. Flat
Surround Installation on page 20.
2. Lift surround assembly to front of appliance
(Figure 20.3 on page 20)
.
3. Assemble trim as shown in
Figure 21.1
.
Overall
Dimensions
Part
Number
Trim Kit
Standard
Size
43” x 31”
SP-4331 TRIMKIT-4331-NL
Large Size
51” x 34”
SP-5134 TRIMKIT-5134-NL
4.
Slide trim over flat surround as shown in
Figure 21.2
.
5.
Install two steel springs at the top on each side and
between the flat surround and the assembled trim kit as
shown in
Figure 21.3
.
NOTE:
May need to pull appliance away from fireplace
to clear mantle as you slide the trim over the
flat surround.
6.
Install two steel springs on each side of the flat
surround towards the bottom and the assembled trim
kit
(Figure 21.4)
.
7.
If needed push appliance back into fireplace.
8. Reinstall face to front of
appliance
(Figure 20.2 on page 20)
.
9. Reinstall the door to the face of the
appliance
(Figure 20.2 on page 20)
.
Table 21.1