Page 34
October 27, 2011
R
Castile & Santa Fe CE Insert
7069-101B
1. Open door to expose the firebox.
2. Install the left log first and then the right log.
Figure 37.1
3. Lean the logs against the cast iron brick in the back of
the firebox.
4. Push the logs to the far left and far right against the
sides of the firebox.
Figure 37.2.
5. To clean the logs, use a vaccum and a soft brush attach
-
ment or a paint brush.
Two Piece Log Set Installation
Figure 37.2
J. Optional Log Set Placement Instructions
CAUTION
Logs are FRAGILE. Use extreme care when handling or
cleaning logs.
NOTE:
Due to the abrasive nature of a pellet appliance fire, the
logs are not covered under warranty. Any placement vari
-
ation other than shown here can cause excessive heat
and shall void the appliance warranty.
Figure 37.1