Quadra-Fire Adventure-II Owner'S Manual Download

Page: 1 / 32

EPA CERTIFIED WOODBURNING

APPLIANCE

NOTICE: DO NOT discard this manual!

Fire Risk.

WARNING

For use with solid wood fuel only.

Other fuels may overfire and generate

poisonous gases (i.e. carbon monoxide).

Owner’s Manual

Care and Operation

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

•

DO NOT

store or use gasoline or other flam-

mable vapors and liquids in the vicinity of this

or any other appliance.

•

DO NOT

overfire. Overfiring will void your

warranty.

• Comply with all minimum clearances to com-

bustibles as specified. Failure to comply may

cause house fire.

WARNING: If the information in these

instructions is not followed exactly, a fire

or explosion may result causing property

damage, personal injury, or death.

WARNING

HOT SURFACES

Glass and other surfaces are hot during

operation AND cool down.

Hot glass will cause burns.

•

DO NOT

touch glass until it is cooled

• NEVER allow children to touch glass

• Keep children away

• CAREFULLY SUPERVISE children in same room as

appliance

• Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable

materials.

• Keep clothing, furniture, draperies and other flammable

materials away.

NOTE

To obtain a French translation of this manual, please contact

your dealer or visit www.quadrafire.com

Poir obtenir une traduction francaise de ce manuel, s’il vous

plait contacter votre revendeur ou visitez ww.quadrafire.com

Model(s):

Adventure-III

Installation and service of this

appliance should be performed by

qualified personnel. Hearth & Home

Technologies recommends HHT

Factory Trained or NFI certified

professionals.

Quadra-Fire • Adventure-III Owner’s Manual • 4083-900 • Rev D • 09/15

Summary of Contents for Adventure-II

































Search results

Summary of Contents for Adventure-II

Reviews:

Related manuals for Adventure-II

Brands by name

Popular brands

Quadra-Fire Adventure-II, Owner'S Manual

Search results

Summary of Contents for Adventure-II

Reviews:

Related manuals for Adventure-II

Brands by name

Popular brands