Quadra-Fire 57ST-ACC-AU Owner'S Manual Download Page 7

Page: 7 / 30

07/21

7038-249C

5700 Step Top AU Wood Appliance

Listing and Code Approvals

Overall Average Efficiency

Burning Hardwood (AS/NZS 4012)

65%

Average Particulate Emission

Factor Burning Hardwood (AS/

NZS 4013)

1.5 g/kg

Maximum Average Heat Output

Burning Hardwood

12.7 kW

Wetback

Wetbacks are

NOT an approved

option and must

be fitted.

Vent Size:

6 inches

Firebox Size:

2.90 cubic feet

Recommended Wood Length:

22 inches

Fuel Orientation:

Front-to-Back

Approved Fuel

Hardwood only

with a Moisture

content less than

25% (dry basis)

The Quadra-Fire 5700 Step Top Australian Wood Appliance is Hardwood Certified. Hardwood Particulate Emissions

equaling 1.5 g/kg with a Space Heating Efficiency of 65%.

A. Appliance Certification

B. BTU & Efficiency Specifications

Model:

5700 Step Top AU Wood Appliance

Laboratory:

Vipac

Report No:

30A-14-0102-TRP-361517-0

Type:

Hardwood only at 25% dry basis

Standard:

AS/NZS4013 for Hardwood

This wood appliance needs periodic inspection and repair for proper operation. It is against federal regulations to operate

this wood appliance in a manner inconsistent with operating instructions in this manual.

NOTE:

Hearth & Home Technologies, manufacturer of this appliance, reserves the right to alter its products, their

specifications and/or price without notice.

Improper installation, adjustment, alteration, service or

maintenance can cause injury or property damage.

For assistance or additional information, consult a qualified

installer, service agency or your dealer.

C. Glass Specifications

This appliance is equipped with 5mm ceramic glass.

Replace glass only with 5mm ceramic glass. Please

contact your dealer for replacement glass.

• Installation and use of any damaged appliance.

•

Modification of the appliance.

•

Installation other than as instructed by Hearth &

Home Technologies.

•

Installation and/or use of any component part not

approved by Hearth & Home Technologies.

•

Operating appliance without fully assembling all

components.

• Operating appliance without legs attached (if

supplied with appliance).

•

Do NOT Over fire - If appliance or chimney

connector glows, you are over firing.

Any such action that may cause a fire hazard.

WARNING

Fire Risk.

Hearth & Home Technologies disclaims any

responsibility for, and the warranty will be

voided by, the following actions:

Summary of Contents for 57ST-ACC-AU































Search results

Summary of Contents for 57ST-ACC-AU

Reviews:

Related manuals for 57ST-ACC-AU

Brands by name

Popular brands

Quadra-Fire 57ST-ACC-AU, Owner'S Manual

Search results

Summary of Contents for 57ST-ACC-AU

Reviews:

Related manuals for 57ST-ACC-AU

Brands by name

Popular brands