quadient IX-7 User Manual Download Page 362

Page: 362 / 380

Remove jammed envelopes.

Position the brush and push the brush release lever until it snaps into place.

Push down on the upper drive assembly until it locks back into position.

Close the cover.

How to Remove Mail Jammed in the Dynamic Scale

Occasionally envelopes can become jammed in the Dynamic Scale.

• Mail size is incorrect.

• Envelopes are not properly stacked on the Feed Platform.

To remove mail jammed in the Dynamic Scale:
1.

Open the cover.

Gently remove the jammed envelopes.

Close the cover.

Troubleshooting

357

| Page 357 | Jun-22-2021 11:01 |

Summary of Contents for IX-7





























































































































































































































































































































































































Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands

quadient IX-7, User Manual

Search results

Summary of Contents for IX-7

Reviews:

Related manuals for IX-7

Brands by name

Popular brands