quadient IS-6000, Installation Manual

Page: 16 / 26

How to Turn the System ON/OFF
1. Press either side of the switch to turn the Postage Meter ON or OFF.
- The dash (or I) indicates the ON side.
- The circle (or O) indicates the OFF side.
After switching the system OFF, there may be a delay of up to 20
seconds to park the print head and free the remaining voltage.
System Sleep Mode
Your Postage Meter is Energy Star® qualified and automatically goes into a low-power
'Sleep' mode after a period of inactivity.
A very low-power 'Sleep' mode, called 'Soft-off' is also available.
• The Postage Meter will automatically switch to 'Sleep' mode after 2 minutes of
non-activity. The Supervisor can change this 2-minute default setting.
• The Postage Meter can be set to 'Sleep' mode manually by a short press on the
Sleep/Wake button.
• The Postage Meter can be set to 'Soft-off' mode manually by a long press on the
Sleep/Wake button.
The light located on the display indicates:
- Amber (continuous) : the Postage Meter is in Sleep mode (low power mode).
- Amber (blinking) : the Postage Meter is in Soft-off mode (very low power mode).
- Green : the Postage Meter is in Wake up mode and ready for use.
SLEEP / WAKE KEY
The Sleep/Wake key is located at the top right corner
of the control panel.
Wakes the Postage Meter up or turns it to 'Sleep' or
'Soft-off' mode.
Sleep/wake
| Page 31 | aug-05-2014 10:23 |