INSTALL AND CONNECT THE ELEMENTS:
1
Feeder (see
respective Quick Install Guides),
2
Base,
3
Catch tray.
CONNECT THE LAN
to a network RJ45 plug of the Base and
to the LAN wall socket using the LAN cable
B
.
OPEN THE BASE COVER
,
remove the headset protecting
strips and insert the headset in its compartment, then push
the headset back until it clicks.
WRITE DOWN THE PSD
number, you may need the number later.
INSTALL THE PSD
in one of the slots and then close the cover.
CONNECT THE SYSTEM POWERPLUG
.
Follow the installation wizard on the screen. Refer to the installation section in the User Guide.
IS-440 QUICK INSTALLATION GUIDE
CAUTION:
use a solid and steady table, far
from any door or fan.
7
4
8
5
3
6
2
3
1
C
B
C
A
1
Check the box contents.
2
If included in your system,
CONNECT THE SCALE
(see its
Quick Install Guide).
For more information about your mailing
system, please visit:
kb.quadient.co.uk/is440_ug