quadient IS-420 User Manual Download

Page: 171 / 220

Using the Mailbox

9.2

The mailbox allows you to receive messages from the Mailing System or from customer

service via the server.
On the home screen, an icon indicates that the mailbox contains unread messages.
The Mailbox list screen indicates

unread messages

and allows you to delete read

messages.

How to Read Messages (as a User)

As a user:

Press

and select the path:

Mailbox

The Mailbox screen is displayed.

Select the message to read and press

[OK]

Select Delete message to erase the message after you have read it.

How to Read Messages (as Supervisor)

As supervisor (see

How to Log in as Supervisor

on page 134):

Press

and select the path:

Mailbox

The Mailbox screen is displayed.

Select the message to read and press

[OK]

Select Delete message to erase the message after you have read it.

166

| Page 166 | Jul-24-2023 01:59 |

Options

and

Updates

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands