quadient IS-420, User Manual, Page: 163 / 220

Connection Settings 8.11
Connection to the Postal Services or Online Services
To add credit or access Online Services, the Mailing System can use the following
networks:
• An analog / fax telephone line through an analog modem.
• An Internet access through a high speed LAN (Local Area Network).
First use the procedure below to select the connection, then configure the connection.
LAN settings can only be performed if the machine was actually
connected to the LAN at power-up.
See also
• To physically connect a modem or the LAN to the base, see Connection Diagram
on page 23.
How to Set the Postal/Online Services Connection
To set the postal/Online Services connection:
1.
As supervisor (see How to Log in as Supervisor on page 134):
Press and select the path: Communication settings Type of
connection
The Server Access screen is displayed.
If you did not have the LAN plugged into the system, you will
get a warning message.
Please follow the message: check your communication cable or
device and press OK.
158
| Page 158 | Jul-24-2023 01:59 |
8
Configuring
your
Mailing
System