quadient IS-350 Page 21 User Manual Download

Page: 21 / 212

Touchpad use

The touchpad is available to move the screen cursor in much the same way a mouse

is used.
Further, left and right click buttons are available to be used for selecting items.
In addition, it allows you to:

• Exactly position the cursor in an entry field.
• Select a part of the content of an entry field.

Report Printer (option)

A USB printer can be directly connected to the mailing system for printing

mailing-related reports.

For more information about compatible printers that can connect

to your mailing system, please contact technical support.

| Page 16 | Jul-24-2023 01:56 |

Meet

Your

Mailing

System

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands