quadient IS-350 Page 117 User Manual Download

Page: 117 / 212

Base errors

This report displays the list of errors encountered on the mailing system and related

to the base.

Requirements

• To generate this report, you have to be logged in as the supervisor.

Outputs

• Screen
• USB Printer
• USB Key

If you use screen to see this report:

•

Scroll

the errors using the arrow keys

and

•

Press

if you want to go back to the selection of

the output.

Content

Comments

Fields

Reference code of the base error: BAS-XX-YYY (XX is a
2–digit number, YYY is a 3–digit number).

Code

Date when error occurred.

Date

Number of imprints when this error occurred.

Cycles

See also

•

Generating a Report

on page 96.

112

| Page 112 | Jul-24-2023 01:56 |

Reports

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands