quadient IS-350 Page 109 User Manual Download

Page: 109 / 212

Credit Data

6.5

Credit Summary Report

This report displays the information on credit usage since the installation of the system.

The content is limited to the history available in the Meter.

Requirements

This report is available as user or supervisor.

Output

• Label
• Screen
• USB printer

Content

Comments

Fields

Printed report only

Current date and time

Printed report only

Meter status

Printed report only

Die number

Total postage printed by the system

Credit used (ascending)

Postage available in the system to print

Credit available (descending)

Total credit downloaded into the system.
Must be equal to asc descending.

Control total

Total number of normal items

Non zero items

Total number of zero items

Zero Items

Total number of zero + non-zero items

Total items

104

| Page 104 | Jul-24-2023 01:56 |

Reports

Summary of Contents for IS-350





















































































































































































































Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands

quadient IS-350, User Manual

Search results

Summary of Contents for IS-350

Reviews:

Related manuals for IS-350

Brands by name

Popular brands