2 - Position Print Units
1.
Loosen locking screw(s)
(a)
.
2.
Position Print Unit(s) as needed
to achieve desired print locations
on Media being fed.
3.
Secure locking screw(s)
(a)
.
1 - Set Up the Media Transport System
Install inkjet cartridges
1.
Release Separator Locking Lever
(a)
by grasping it at the top of the
Lever and rotating it down. This
will release Sheet Separators
(b).
Sheet Separation & Guide Adjustments
2.
Lift all four Separators
(b)
so they are in the “up and
locked” position.
5.
Loosen Media Side Guide
Locking Knobs
(d)
then adjust
Side Guides
(c)
to within 0.8
mm of Media then tighten Media
Side Guide Locking Knobs
(d)
to secure Side Guide positions.
6.
Adjust Media Support
Wedge
(e)
so trailing
edge of Media stack is
raised about 12 mm and
rests on curve of Wedge
then tighten Locking
Knob.
For additional information on your adressing system please
consult the user guide:
kb.quadient.com/as650_ug_en
•
Print Image
: Select, Import or Delete an
image.
•
Printer Setup
: Set Printer parameters to
adjust the Printer.
•
Tools:
Run Ink Cost Estimator, Ink Status,
Diagnostic tests, Network, and Screen
Calibration.
•
Print Data
: Display information about the
job printing.
•
Test Print
: Print a test page using current
adjustments and print parameters.
•
Info
: Display information about the Printer.
Main menu
To adjust media thickness:
1.
Turn Media Thickness Knob
(a)
fully
2.
Slide a piece of media
(b)
under
Printheads
3.
Adjust the Media Thickness Knob
(a)
counter-clockwise until the bottom
of the Print Unit just touches the
media. Then remove the media.
4.
Position the Exit Pressure Roller
Assembly so it rides on the media.
5.
Turn Printer ON.
3 - Media Thickness Adjustment
To install inkjet cartridges,
open latch lever fully, place
cartridge into pen stall and
push until it bottoms out in
pen stall. Close latch lever.
a
b
a
1
3.
Place one piece of Media in
center of Feed Table and under
the Separators
(b)
.
4.
Rotate Separator Locking
Lever
(a)
up, to lock the
Separators in place.
b
a
c
d
e
AS-650
Quick start Guide
A0136345/A - 29/10/2020
1/4
