•
Accent Button & Led:
The “Accent” button is located at the lower left section of
the device. This sets or unsets the device in “Accent Mode”.
While in “Accent Mode”, the MIDI velocity of the device is quantized in to two
settings. MIDI key presses with velocity under 100 will produce non-accented hits,
while hits with velocity ranging from 100 to 127 will produce accented hits.
The difference of amplitude between accented and non-accented hits is set using
the “Accent / Velocity Sensitivity Level”.
With the “Accent Mode” turned off MIDI velocity works as expected, but you can
adjust the hit sensitivity using -once again the “Accent / Velocity Sensitivity
Level” fader.
•
Drum Pads:
The RZ-i has a drumset of 12 sounds total. These sounds have black
colored buttons. Furthermore there are 4 grey buttons which trigger the user
defined samples, which you can load to the device (See Chapter 4: Samples
Feature).
•
Sampe Bank (Patch) Loader:
Finally at the bottom right of the device you can
find the Sample Memory Loader. The Sample Memory Loader is nothing more than
a standard patch browser which in the case of RZ-i is used to load sounds. No
other information is saved within the patch except that. For more information see
Chapter 4: Samples Feature in this manual.
Page 5
