2
IMPORTANT SAFETY INFORMATION
Before installing this product read all these instructions!
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
Read these instructions. Keep these instructions. Heed all
warnings. Follow all instructions.
Before making any connections, switch all the units in
your system o
ff
at the mains.
Set the volume control at minimum when you switch on
your system or change sources, and turn the level up
gradually.
Do not
use your amplifier at full volume.
Ensure that all loudspeakers in the system are correctly
wired.
Do not
subject your loudspeakers to excessive cold, heat,
humidity or sunlight.
Loudspeakers should not be placed directly facing other
hi-fi units or share the same shelf or cabinet.
Do not
place heavy objects on top of loudspeakers.
Some manufacturers forbid the placing of objects on top
of their TV sets. Check your TV handbook before
installing the speaker directly on your TV set. Consult
your TV dealer if you are in any doubt.
Do not
connect speaker terminals to the mains supply.
Do not
dismantle the loudspeaker. There are no user
serviceable parts inside it and you will void the warranty
by doing so.
Refer all servicing to
qualified
service personnel.
Servicing is required when the apparatus has been
damaged in any way, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user's
authority to operate this device.
Unpacking Your Loudspeaker
Revela loudspeakers come in different shapes and sizes.
If you are unpacking a floor-stander, please remember
that these units are heavy. We suggest that you have
someone to assist you.
Lift the loudspeaker carefully out of the packing.
Do not
try and lift the loudspeaker using the protective bag.
Unpack the accessories carefully.
If there is any sign of damage or if the contents are
incomplete, report this to your dealer as soon as possible.
Retain the packing for future safe transport of the
product. If you dispose of the packing, do so with respect
to any recycling provisions in your area.
QUAD Revela 1 bookshelf: these loudspeakers should
ideally be stand mounted though they may be placed on
a rigid shelf separate from the rest the system.
QUAD Revela 2 floor-stander: these loudspeakers are
floor-standing and should be fitted with spikes for better
stability and performance.
Attaching the Spikes to Floor-standing Model
- Revela 2
·
·
·
·
·
·
Levelling the Floor-standing Model - Revela 2
·
·
·
·
Make sure you have plenty of unobstructed working space.
Place a soft cloth on the floor to protect the loudspeaker.
Invert the loudspeaker onto the cloth.
Thread a locknut onto each spike and loosely rub it up
the thread.
Thread the spikes into the spike inserts. Tighten them
with finger tight.
Invert the loudspeaker. Be careful not to damage the
floor with the spikes.
When the speaker is upright: You will probably find
that the speaker will wobble with one spike not
contacting the floor. Adjust this spike until all four
spikes are in contact to the floor.
With the aid of a spirit level move each spike in and out
until the loudspeaker is level and sitting squarely on all
four spikes without rocking.
Now tighten each locknut securely against the collar in
the plinth to secure the spike.
Screw in rubber feet are provided for use on wood or
stone floors etc. and should be attached in the same
manner as the spikes.