QUAD CONCOURSE Q - 2 - REV 1, Instruction Booklet, Page: 6 / 12

6
STEP 1b
STEP 2
STEP 3
INSTALLATION
Step 1 – Install bracket A to wall using suitable fasteners.
Step 1a – Remove four screws holding cover plate (2) on rear
of speaker.
Step 1b – Mount the bracket with the threaded bolt to the
cabinet using the four screws removed in step 1 (4).
Step 2 – Place the rubber friction washer over the bolt.
Step 3 – When the speaker is ready for installation, insert the
bolt in the wall plate bracket from below.
Step 4 – Place the dome cover over the bolt.
Step 5 –
Place the lock washer and hex nut on the bolt. Tighten
gently, aim the speaker as needed and tighten firmly.
Step 6 – Ensure that seismic restraint cable is firmly attached
to both the loudspeaker and an anchor point on the mounting
surface.
STEP 1
( BRACKET A )