© 2017 QuadH2O All Rights Reserved
SARAH2O PRO User Manual
8
The SARAH2O PRO utilizes the DJI GO app. The app enables you to control all aspects of flight and
the X3 camera/gimbal via your smart phone or tablet. The devise is compatible with both IOS and
Android devices and can be downloaded via the Quadh2o website.
You will need to download and install the app to your device. You will be prompted to create a free DJI
account. Once you have created your account please follow our DJI GO app guide below;
1. Be sure to fully charge your tablet or mobile device before launching the app. A tablet is
recommended for a better user experience.
2. If you are using a phone as your mobile display device, be sure to continue flying safely when the
phone receives an incoming call. Do NOT accept phone calls during flight.
3. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with
the related regulations in your area. You are solely responsible for being aware of all relevant
regulations and flying in a way that is compliant.
4. Land your aircraft immediately if there is an alert shown on the app.
5. Examine and check all warning messages on the checklist displayed in the app prior to each flight.
6. Use the in-app simulator to practice your flight skills if you have never operated the aircraft or if you
do not have sufficient experience to be comfortable operating the aircraft.
7. Beginner Mode is enabled by default when you launch the app for the first time. The aircraft’s
altitude and flight distance is restricted when flying in Beginner Mode. We recommend you fly in
Beginner Mode to perfect your flight skills. Operate the actual aircraft only after you are confident
that you have mastered adequate flight skills.
8. Cache the map data of the area where you intend to fly the aircraft by connecting to the Internet
before each flight.
DJI GO app
• Read and understand the warning messages before using the Auto-take off and Auto-land
feature.
• Read and understand the warning messages before re-setting your Home Point.
• Read and understand the warning message and disclaimer before setting the altitude
beyond the regulatory limit.
• Read and understand the warning messages and disclaimer before switching between the
flights modes.
We do not recommend you adjust any of the N3 flight controller settings unless you are an
experienced drone pilot or have been instructed to do so by QuadH2O.
Do NOT switch from P mode unless you are sufficiently familiar with the aircrafts behavior for
each flight mode, since disabling GPS may result in being unable to land the aircraft safely.
When updating the N3 firmware via the Assistant Software, you will need to re-configure the N3
flight controller settings for the SARAH2O PRO. A pre-set configuration file can be downloaded via the
QuadH2O website.