Remote control:
The Tri-PAR is supplied with an I.R. remote control for quick access to most of the basic functions of the
unit. This has a maximum range of approximately 4-5m and must be aimed towards the front of the unit.
Controls and functions are listed on the diagram below:
DMX mode:
The Tri-PAR can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on
the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
to confirm.
This unit has 4, 6 or 8 DMX channels as indicated in the table below:
Channel 4 Channel Mode
6 Channel Mode
8 Channel Mode
CH1
1-255 red dimmer
1-255 total dimmer
1-255 total dimmer
CH2
1-255 green dimmer
1-10 off, 11-255 strobe
(slow to fast
)
1-255 red dimmer
CH3
1-255 blue dimmer
1-255 red dimmer
1-255 green dimmer
CH4
1-255 white dimmer
1-255 green dimmer
1-255 blue dimmer
CH5
1-255 blue dimmer
1-255 white dimmer
CH6
1-255 white dimmer
1-10 off
,
11-255 strobe (slow
to fast
)
CH7
1-10 off
11-50 color mix mode (use
Ch8 for variations)
51-100 color jump mode
101-150 gradual change mode
151-200 mutation pattern
201-220 Color jump sound
1.
Dimmer/speed increase
2.
Dimmer/speed decrease
3.
Green static colour
4.
Red static colour
5.
No function
6.
No function
7.
Static colour mix 1
8.
Static colour mix 2
9.
Static colour mix 4
10.
Static colour mix 5
11.
Static colour mix 7
12.
Static colour mix 8
13.
Power off
14.
Power on
15.
Blue static colour
16.
White static colour
17.
DMX mode
18.
Auto mode 1 (colour jump)
19.
Strobe mode
20.
Static colour mix 3
21.
Auto mode 2 (colour fade)
22.
Static colour mix 6
23.
Sound mode
24.
Static colour mix 9
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.