Placement:
•
Use the included mounting brackets to fix to a stand or lighting truss.
•
Use secondary safety fixings if mounting overhead.
•
Keep away from damp or dusty environments.
•
Ensure adequate airflow around the fixture housings.
•
Ensure adequate access to controls and connections.
•
Do not aim LED or laser output directly into line of sight, as this can result in eye injury.
Cleaning:
•
Use a soft cloth with a neutral detergent to clean the casing as required.
•
Do not use strong solvents for cleaning the unit.
Side panel controls:
Manual control menu:
Press the
“
MENU
” butto
n to enter the settings menu.
P
ress “
UP
” and “
DOWN
”
buttons to navigate through various setting functions.
P
ress “
ENTER
”
button to confirm the desired setting.
Menu
Function
Description
d001
d001 - d512
DMX address settings
CH3/CH7/CH13
DMX channel selection
Au
Au00 - Au16
Automatic modes
FL
FL00 - FL09
Automatic mode strobe
–
slow to fast
SP
SP00 - SP09
Automatic mode speed
–
slow to fast
So
So01 - So02
Sound activated modes
Sn
Sn01 - Sn09
Sound activated mode sensitivity adjustment
–
low to high
DMX mode:
The Tri-Bar can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on
the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select d001 from the menu and confirm the correct
start address and channel selection by using the
“
UP
”
and
“
DOWN
”
buttons and
“
ENTER
”
. The
“
d
”
on
the LED display will begin to flash once it
’
s received the DMX signal from the controller. This unit has 3, 7
or 13 DMX channels as indicated in the table below:
