Qtx TinyMover, User Manual, Page: 3 / 5

www.avsl.com 150.462UK User Manual
Manual control menu:
Pre ss the “ MENU ” butto n to enter the settings menu.
Press “ UP ” and “ DOWN ” buttons to navigate through various setting functions.
Press “ ENTER ” button to confirm the desired setting.
Menu Function Description
Addr A001 - A512 DMX address settings
CHnd 14CH-18CH DMX channel select
SLnd Mast-d512 Master or slave select
Shnd Sh1-Sh4 Sound active modes
Auto Aut1-Aut4 Auto mode select
Sp1-Sp9 Auto mode speed select (slow to fast)
Sens 1-100 Sound active mode sensitivity adjust
LED On-Off LED display setting
diSP On-off LED display reverse
Pan No-Yes X-axis positive phase/X-axis reverse phase
Tilt No-Yes Y-axis positive phase/Y-axis reverse phase
Ver V10 Software version
Rest Factory reset
DMX mode:
The TinyMover can be controlled by DMX signal, simply connect the DMX signal source to the DMX input
on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping
through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct
start address by using the “ UP ” and “ DOWN ” buttons and “ ENTER ” . The A on the LED display will begin
to flash once it ’ s received the DMX signal from the controller. This unit has 14 or 18 DMX channels as
indicated in the tables below:
14 Channel:
Channel Value Description
1 0-255 PAN adjust
2 0-255 Tilt adjust
3 0-255 Motor speed
4 0-255 Master dimmer
5 0-255 LED ball red dimmer
6 0-255 LED ball green dimmer
7 0-255 LED ball blue dimmer
8 0-255 LED ball white dimmer
9 0-255 PAR red dimmer
10 0-255 PAR green dimmer
11 0-255 PAR blue dimmer
12 0-255 PAR white dimmer
13 0-9 No strobe
10-140 Strobe 0-100%
141-255 Strobe random speed
14 0-9 Manual dimmer
10-199 Auto mode
200-209 Waiting for 2s reset
210-239 Manual dimmer
240-255 Sound active mode