151.597UK User Manual
Introduction
Thank you for choosing the SURGE effect light as part of your light show. This compact fixture is a complete lighting
effects solution in a single fixture, featuring LED Derby with Strobe, UV and Red/Green Laser functions, all controllable
from DMX, internal or remote control. Please read and keep the following instructions for future reference.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric
shock is present within this unit
This symbol indicates that there are important operating and maintenance
instructions in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to moisture.
If liquids are spilled on the housing, stop using immediately, allow unit to dry out and have checked by qualified
personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case. No user serviceable parts
inside
–
Do not open the case
–
refer all servicing to qualified service personnel.
Safety
Check for correct mains voltage and condition of IEC lead before connecting to a power outlet.
Do not allow any foreign objects to enter the case or connectors.
Placement
•
Keep away from damp or dusty environments
•
Use the included tripod stand for installation onto a stable surface
•
Ensure adequate air-flow around the fixture housings
•
Ensure adequate access to controls and connections
Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly.
This product is a Class 3B laser and should only be installed and used by personal who are trained in the
management of laser radiation and are able to operate in accordance within the guidance given by the
Health and Safety Executive (HSE) in HS(G)95: “The Radiation Safety of Lasers used for Display
p
urposes”.
Copies of this guide can be downloaded from the HSE website:
www.hse.gov.uk/pubns/priced/hsg95.pdf
Cleaning
•
Use a soft cloth with a neutral detergent to clean the casing as required
•
Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
•
Do not use strong solvents for cleaning the unit
In the box
Please open the package carefully and check that all contents are present and in good condition.
Contact your retailer if any part is missing or broken.
•
SURGE LED + Laser light effect unit
•
Mounting bracket
•
IR remote control
•
IEC mains lead(s)
•
Laser switch key
