Quest PA User Manual
Internal media player
Each Quest portable PA unit has an internal media player for digital audio playback from
USB/SD/MMC media, FM tuner or via Bluetooth.
Press ‘Mode’ (9) to select the function you require –
USB/SD, FM radio (89-107) or Bluetooth.
–
Use this mode for both USB and SD/MMC cards
FM Radio
–
(the last chosen frequency will appear)
–
Use this mode for
Bluetooth™
selection
Playback from USB Device or SD/MMC Card
Inserting a USB memory device into the USB connector or SD/MMC card into the SD/MMC card
slot will automatically load up and begin playback of mp3 or wma tracks stored on the media.
If playback does not start, press the PLAY button or remove the memory device and check
that the stored files are the correct compressed audio format before re-connecting.
MODE will switch audio source or record mode
PLAY will alternately play or pause the selected track or auto-tune FM stations
STOP will stop playback and return to the start of a track
REPEAT will select between repeating
track or
tracks
–
hold to change folder
PREV will step backwards through tracks
–
hold for reverse seek
NEXT will step forwards through tracks
–
hold for forward seek
To step through folders on the storage media, press and hold the REPEAT button
(Note: Pressing and holding the STOP button will step backwards through folders)
Recording
To record to the storage media, press the MODE button to select record mode and then press
the PLAY button to start recording. To play back recorded content, press and hold the PLAY
button for 3 seconds.