178.565UK, 178.569UK User Manual
Rear Panel Layout
Connection
With master LEVEL control turned down and power switched off, connect the IEC mains lead
to an appropriate mains outlet.
If a microphone is to be connected directly into the QS active speaker, connect it to either
input 1 or 2 via XLR or 6.3mm jack.
Connect any line level signal (e.g. MP3 player or CD player) or mixer output to the line input
either via XLR or twin RCA lead.
If the combined input signal is to continue to further active speakers, connect these from the
LINE OUT from either the XLR connector or 6.3mm jack.
Operation
BASS and TREBLE controls should remain pointing vertically (12-o-clock position).
With all 3 input LEVEL controls turned fully down, press the power switch on and turn the
master LEVEL control up gradually part way. For each input, gradually turn up the LEVEL
control until the required volume is achieved.
1.
6.3mm jacks for microphone inputs 1+2
2.
XLR connectors for mic inputs 1+2
3.
LEVEL controls for mic inputs 1+2
4.
R+L RCA inputs (summed) for line input
5.
LEVEL
–
volume control for line input
6.
XLR connector for line input
7.
LEVEL
–
master volume control
8.
TREBLE
–
master treble EQ control
9.
BASS
–
master bass EQ control
10.
CLIP
–
signal overload indicator
11.
Power on indicator
12.
POWER
–
mains on/off switch
13.
IEC mains inlet with fuse
14.
XLR line output
15.
6.3mm jack line output