background image

 

172.020UK/172.025UK  User Manual 

Maintenance: 

No user serviceable parts inside, refer all servicing issues to qualified service personnel.  
Clean case with a lint-free dry or slightly damp cloth, keep ventilation grille and fans clear of debris

  

 

Troubleshoot: 

 
NO OUTPUT -  

Check mains power is on and fuse is OK 
Check leads and connections 

Check PROTECT LEDs are not lit 
Check speakers are working on another amplifier 

 
DISTORTED OUTPUT -  

Reduce the input signal level. Ensure that the amplifier output level is within the maximum rating of the 

connected speakers and gradually increase the input signal, ensuring that the signal is clean and free from 
distortion. 

 
If protect mode is active, refer to qualified service personnel 

 

 
 
 

 
 
 
 

 
 
 

 
 
 

 
 
 
 

 
 
 

 
 
 

 
 

   

 

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its 

useful life. The goods must be disposed of according to your local council guidelines. 

 
 

 

Errors and omissions excepted. 

 

Copyright©  2015. AVSL Group Ltd. 

Summary of Contents for QA400

Page 1: ...ctor Specification QA400 QA1000 Output Max per channel 4Ω 200W 500W Output RMS per channel 4Ω 100W 250W Output Max per channel 8Ω 140W 340W Output RMS per channel 8Ω 70W 170W Dimensions 88 x 482 x 270mm 88 x 482 x 340mm Weight unpacked 6 8kg 9 1kg Thank you for purchasing this QTX Sound QA series power amplifier This product is intended to give long term reliable service in normal usage Please rea...

Page 2: ...de 4 POWER SWITCH Switches mains power on off Rear panel 5 COOLING FAN Do not cover or restrict airflow 6 IEC MAINS INLET Check voltage and connect to mains with supplied lead 7 MAINS FUSE to replace fuse disconnect mains open with screwdriver 8 OUTPUT SECTION Connect speakers using speaker sockets jack or binding posts 9 INPUT SECTION Connect mixer or other audio source via combo XLR jack or RCA ...

Page 3: ...lower than 4Ω per channel When using 8Ω speakers connect the speakers in pairs to each other and then connect one of each pair to an amplifier channel output Connect the mixer or audio source to either the combo or RCA input sockets With channel A B levels down switch the power on Gradually increase channel levels and check for sound from speakers If there is no sound turn down channel levels swit...

Page 4: ...lifier DISTORTED OUTPUT Reduce the input signal level Ensure that the amplifier output level is within the maximum rating of the connected speakers and gradually increase the input signal ensuring that the signal is clean and free from distortion If protect mode is active refer to qualified service personnel This product is classed as Electrical or Electronic equipment and should not be disposed w...

Reviews: