MIXCAB-15, XCAB-15 User Manual
Recording to USB or SD media
When in USB or SD card mode, the overall mix output of the MIXCAB-15 can be recorded to a
memory device that is connected to the internal media player. The memory device may be
USB or SD card (whichever is inserted first).
Press the MODE button to select REC mode (
),
then press Play/Pause (
) to
begin recording. The overall mix will now begin recording as a file on the storage device.
Press Play/Pause (
) again to stop recording.
(note: if both USB & SD are connected, then repeated pressing of the MODE button to loop
through all options back to REC mode will then default to writing to the SD card)
To play back the recorded file(s), press and hold Play/Pause (
) for 3 seconds and the
recorded file(s) will be displayed. Then, navigate to the required file and press Play/Pause
(
) for playback.
FM Tuner
In FM tuner mode, the station frequency (in MHz) will be displayed.
For initial setup, press PLAY/PAUSE to begin the auto-tuning process.
The tuner will seek through all frequencies for strong signal reception (i.e. radio stations)
These will be stored into memory as
,
,
,
… etc.
Stored stations can then be selected using the PREVIOUS or NEXT buttons
Bluetooth Connection
Select Bluetooth (
) using the MODE button.
Scan for Bluetooth devices on your phone or other Bluetooth enabled audio player and check
for a device called
‘
MIXCAB
’
. Select this device and opt to connect your Bluetooth device,
which should then state that it is connected to
‘
MIXCAB
’
for audio output.
Play audio from your Bluetooth device and check for output through the MIXCAB-15 unit.
If there is no output, check that the correct
‘
MIXCAB
’
Bluetooth ID is paired and that the
media volume control and master volume control are turned up.
In the eventuality that more than one device is called
‘
MIXCAB
’
, try each device in turn until
the correct one is found. Check also that the volume level is turned up on the sending device.
Once audio is playing through the MIXCAB-15 from Bluetooth, adjust the media volume control
(17) to the required volume.
Bluetooth on the MIXCAB-15 can only pair to a single device at any one time and should be
operable over a range of 5 to 8 metres.