152.767UK User Manual
1.
Mode select switch to select between
auto and sound to light modes
2.
Built-in mic
3.
IR receiver
4.
LED status indicator
5.
Battery power switch
6.
12Vdc in
7.
Ventilation fan, do not block
On/Off
– to turn unit on and off
Sound to light
– press to select sound to light mode, sensitivity can be adjust through
numbers 1-9 (1 being least sensitive and 9 being most sensitive).
Auto mode
– press to select auto mode, the laser will run through various different effects.
Colour selection
– press to select different laser colours and combinations.
Effect freeze
– press to freeze current displaying effect.
A
– controls red colour laser, press A then number 1 to 9 to control the red laser strobe.
Speed increase with number value. Press A then 0 will turn the red laser off.
B
– controls green colour laser, press B then number 1 to 9 to control the green laser strobe.
Speed increase with number value. Press B then 0 will turn the green laser off.
C
– controls blue colour laser, press C then number 1 to 9 to control the blue laser strobe.
Speed increase with number value. Press C then 0 will turn the blue laser off.
- press to change the refraction effect.
Maintenance
There are no end-user serviceable parts within the unit. To maintain a workable condition we
advice dusting the unit on a regular basis. Before cleaning or dusting, always ensure the
mains power cable is removed from the unit. Use a soft cloth, lightly dampened with water or
mild detergent to wipe off the dust from the casing. DO NOT use spray on the case as
droplets may enter the unit through the ventilation and cause damage to electronics inside.
Remove the trapped dust from the ventilation holes of the unit with a vacuum cleaner with a
brush attachment, a dust blower or a hand brush.
